Interview: Why materials are critical to building industrial fusion power plants

November 16, 2026

Jan Coenen headshot

Developing a fusion power plant involves more than creating the conditions for fusion to occur. Engineers must also identify materials that can withstand demanding operating conditions, be manufactured into reliable components and perform safely throughout the plant's working life.

These decisions have significant implications for how fusion power plants are designed, maintained and ultimately brought into operation.

We spoke to Dr Jan Coenen, Head of Materials at Gauss Fusion, about the challenges of selecting and qualifying materials for fusion energy, and how this work is informing the development of Gauss Fusion's GIGA™ stellarator power plant concept.


Q. Why are materials such an important consideration when moving from fusion experiments towards industrial power plants?

Fusion places extraordinary demands on materials. We are dealing with high temperatures, intense heat loads and high-energy neutrons, which can damage materials and change their properties over time.

The challenge is that these effects do not occur independently. A material might perform well at high temperatures, for example, but become more brittle when exposed to neutrons. Another might have attractive mechanical properties but present difficulties when it comes to manufacturing or joining it to other components.

When you move towards an industrial power plant, you have to consider all these factors together.

In a research experiment, the primary objective is often to investigate the plasma and demonstrate particular aspects of fusion performance. A power plant must also generate electricity reliably, allow components to be inspected and replaced, and meet demanding safety requirements.

This changes how we think about materials. We need to understand not only whether a material can withstand particular conditions, but how long a component might last, how it can be maintained and what happens when it eventually needs replacing.

These questions directly influence the design of the plant. Materials are not something you can select at the end of the engineering process.


Q. What makes choosing the right materials particularly challenging?

One of the biggest challenges is that there is rarely a perfect material for a particular application.

Take the components surrounding the plasma. They must manage heat and withstand neutron exposure, while also performing structural or protective functions. Different materials offer different advantages, but each comes with limitations.

Tungsten, for example, is attractive for components exposed to intense heat because of its very high melting point. But we also need to understand how it behaves under neutron exposure, how it can be joined to other materials and how the finished component will perform over time.

Structural steels present a different set of decisions. Some have a long industrial history, established manufacturing processes and recognised engineering standards. Others have been developed specifically for fusion applications and may offer advantages, but require further testing or industrial development.

For steels, this is also a manufacturing challenge. We need to establish whether industrial suppliers can deliver the required plates, forgings or other product forms at the right dimensions and with consistent quality. Heat treatment, joining and inspection have to be considered alongside the choice of steel grade, because the properties of the finished component depend on how it is made.

That means engaging manufacturers early and using representative production trials and component prototypes to demonstrate the manufacturing route. An established steel grade is a valuable starting point, but its suitability still has to be demonstrated for the intended component and operating conditions.

This means examining the trade-offs between different materials in the context of the complete power plant.

A material that looks promising in isolation may create difficulties elsewhere in the design, whether in manufacturing, maintenance or its interaction with other systems.

As such, our approach is to draw on materials with an established industrial basis wherever appropriate, while identifying the additional work needed to demonstrate their suitability for fusion.

The objective is not to avoid innovation. It is to concentrate our development efforts where they are most needed, rather than introducing unnecessary technical risks.


Q. How do you establish whether a material is suitable for a fusion power plant, particularly when some of the necessary evidence does not yet exist?

This is one of the central challenges facing the fusion industry.

In conventional engineering, designers can often rely on established material standards and design codes. These provide recognised data and rules for determining whether a material is suitable for a particular application.

For fusion, the picture is more complicated. We can draw on knowledge from existing industries, nuclear reactors and fusion research, but the available evidence does not always reflect the precise conditions that materials will experience inside a future fusion power plant.

There are important gaps in understanding how some materials behave after prolonged exposure to the high-energy neutrons produced by fusion.

One way we are addressing this challenge is through the development of a Materials Data Handbook.

This brings together the material properties needed for engineering design, identifying where the information comes from and the conditions under which it can be used.

Just as importantly, it helps us identify what we do not yet know.

Where evidence is insufficient, we can determine what further work is needed. That might involve reviewing existing research, conducting additional tests or demonstrating that a manufactured component meets the necessary requirements.

Alongside the handbook, we also need a materials qualification and substantiation roadmap: a clear plan for building the evidence that supports each design decision. For each critical application, this should connect the operating requirements and available data to the remaining evidence gaps, the tests and manufacturing demonstrations needed, and the criteria for accepting the results.

The roadmap should also define responsibilities and milestones, so that the evidence is available when the relevant design, procurement or operating decision has to be made. Where uncertainties remain, it should show how they affect operating limits, component lifetime or the need for further development. The handbook and roadmap therefore work together: one provides the controlled evidence base, while the other sets out how we close the gaps and use that evidence.

This was an important theme discussed at a meeting we held last month with colleagues at Fusion for Energy (F4E). It provided a useful opportunity to exchange perspectives on material qualification, manufacturing experience and engineering design standards. These discussions are valuable because the industry needs to build on existing knowledge rather than repeatedly starting from scratch.

Ultimately, qualifying a material means establishing reliable evidence that it can perform its intended function under defined conditions. That evidence must also account for how the material is manufactured and used within a particular component.


Q. Materials development also depends on industrial supply chains. How significant is that challenge for fusion?

It is extremely significant, and something the industry needs to address well before power plants enter construction.

There is an important difference between producing a material in a laboratory and establishing a supply chain capable of delivering it consistently, at the required quality and in the quantities needed for an industrial programme.

One example is lithium-6, a particular form of lithium that plays an important role in producing tritium, one of the fuels used in fusion.

In a fusion power plant, a component known as the breeding blanket surrounds the plasma and uses neutrons from the fusion reaction to produce tritium from lithium. This helps address the need for a continuing supply of fusion fuel.

But having access to lithium-6 is only part of the challenge. We also need to understand whether it can be produced to consistent specifications, its quality reliably verified and the material processed into a form suitable for use.

These were among the issues we explored at a recent workshop hosted with colleagues at the Karlsruhe Institute of Technology (KIT) within the framework of the MAT-TRIx Hub in Germany.

From an industrial perspective, we need to assess potential production methods against comparable requirements, including material quality, technical maturity and the ability to increase production.

This illustrates a wider challenge facing fusion. Even where the underlying technology works, it cannot be deployed industrially unless the necessary materials and components can be manufactured and supplied reliably.

Addressing that requires early engagement between fusion developers, research organisations and industrial suppliers.


Q. How does this materials strategy support Gauss Fusion's wider ambition to develop industrial stellarator power plants?

For Gauss Fusion, the starting point is that we are designing an integrated power plant, not a collection of individual technologies.

Our GIGA™ platform brings together the stellarator, magnets, breeding blanket and other systems needed for a functioning power plant. Materials choices in one part of the design can have consequences for others.

For example, exposure to neutrons affects how we assess component lifetimes and shielding requirements, while the ability to inspect or replace components influences how the plant is designed and maintained.

That is why materials engineering needs to be considered from the beginning.

Our strategy is to use the best available materials and evidence, identify the most important uncertainties and address them progressively through analysis, prototype development and testing.

A pragmatic approach also means distinguishing the evidence needed for initial operation from the evidence needed to demonstrate a full commercial service life. Initial operation must be supported by a substantiated set of operating conditions and component lifetimes. Depending on the component, this could involve conservative limits, planned inspection and surveillance, and provision for replacement.

Ultimately, this is about making informed engineering decisions at every stage of development. By understanding the limitations of the available materials and evidence, we can account for them in our designs, prioritise the testing that matters most and establish a credible pathway towards an operational fusion power plant.

Gauss Fusion’s pragmatic materials approach is a key pillar of our value proposition within the TRIMAT™ platform because it converts fusion into a bankable, insurable and scalable infrastructure asset.